RTJ FACE DIMENSIONS AND FLANGE TOLERANCES

Description

Nominal Pipe SizeGroove DimensionsDiameter of Raised Portion K
150 PSI300 PSI400 PSI600 PSI900 PSI1500 PSI2500 PSIGroove #Pitch DiaDepthWidthRadius at Bottom150 PSI300 400 600 PSI900 PSI1500 PSI2500 PSIDepth
PEFRE
……..1/2……..1/2……..……..……..R111-11/327/329/321/32……..2……..……..……..7/32
……..……..……..……..……..1/2……..121-9/161/411/321/32……..……..2-3/82-3/8……..1/4
……..3/4……..3/4……..……..1/2131-11/161/411/321/32……..2-1/2……..……..2-9/161/4
……..……..……..……..……..3/4……..141-3/41/411/321/32……..……..2-5/82-5/8……..1/4
1……..……..……..……..……..……..151-7/81/411/321/322-1/2……..……..……..……..1/4
……..1……..1……..13/41621/411/321/32……..2-3/42-13/162-13/162-7/81/4
1-1/4……..……..……..……..……..……..172-1/41/411/321/322-7/8……..……..……..……..1/4
……..1-1/4……..1-1/4……..1-1/41182-3/81/411/321/32……..3-1/83-3/163-3/163-1/41/4
1-1/2……..……..……..……..……..……..192-9/161/411/321/323-1/4……..……..……..……..1/4
……..1-1/2……..1-1/2……..1-1/2……..202-11/161/411/321/32……..3-9/163-5/83-5/8……..1/4
……..……..……..……..……..……..1-1/4212-27/325/1615/321/32……..……..……..……..45/16
2……..……..……..……..……..……..223-1/41/411/321/324……..……..……..……..1/4
……..2……..2……..……..1-1/2233-1/45/1615/321/32……..4-1/4……..……..4-1/25/16
……..……..……..……..……..2……..243-3/45/1615/321/32……..……..4-7/84-7/8……..5/16
2-1/2……..……..……..……..……..……..2541/411/321/324-3/4……..……..……..……..1/4
……..2-/12……..2-1/2……..……..22645/1615/321/32……..5……..……..5-1/45/16
……..……..……..……..……..2-1/2……..274-1/45/1615/321/32……..……..……..5-3/8……..5/16
……..……..……..……..……..……..2-1/2284-3/83/817/321/16……..……..……..……..5-7/83/8
3……..……..……..……..……..……..294-1/21/411/321/325-1/4……..……..……..……..1/4
……..……..……..……..……..……..……..304-5/85/1615/321/32……..……..……..……..……..5/16
……..3……..33……..……..314-7/85/1615/321/32……..5-3/46-1/8……..……..5/16
……..……..……..……..……..……..33253/817/321/16……..……..……..……..6-5/83/8
3-1/2……..……..……..……..……..……..335-3/161/411/321/326-1/16……..……..……..……..1/4
……..3-1/2……..3-1/2……..……..……..345-3/165/1615/321/32……..6-1/4……..……..……..5/16
……..……..……..……..……..3……..355-3/85/1615/321/32……..……..……..6-5/8……..5/16
4……..……..……..……..……..……..365-7/81/411/321/326-3/4……..……..……..……..1/4
……..4444……..……..375-7/85/1615/321/32……..6-7/87-1/8……..……..5/16
……..……..……..……..……..……..4386-3/167/1621/321/16……..……..……..……..87/16
……..……..……..……..……..4……..396-3/85/1615/321/32……..……..……..7-5/8……..5/16
5……..……..……..……..……..……..406-3/41/411/321/327-5/8……..……..……..……..1/4
……..5555……..……..417-1/85/1615/321/32……..8-1/48-1/2……..……..5/16
……..……..……..……..……..……..5427-1/21/225/321/16……..……..……..9-1/21/2
6……..……..……..……..……..……..437-5/81/411/321/328-5/8……..……..……..……..1/4
……..……..……..……..……..5……..447-5/85/1615/321/32……..……..……..9……..5/16
……..6666……..……..458-5/165/1615/321/32……..9-1/29-1/2……..……..5/16

Dimensions in inches. Raised face height matches depth of groove

 

Dimensions of Ring-Joint Facings

Nominal Pipe SizeGroove DimensionsDiameter of Raised Portion K
150 PSI300 PSI400 PSI600 PSI900 PSI1500 PSI2500 PSIGroove #Pitch DiaDepthWidthRadius at Bottom150 PSI300 400 600 PSI900 PSI1500 PSI2500 PSIDepth
PEFRE
……..……..……..……..……..6……..R468-5/163/817/321/16……..……..……..9-3/4……..3/8
……..……..……..……..……..……..64791/225/321/16……..……..……..……..111/2
8……..……..……..……..……..……..489-3/41/411/321/3210-3/4……..……..……..……..1/4
……..8888……..……..4910-5/85/1615/321/32……..11-7/812-1/8……..……..5/16
……..……..……..…….……..8……..5010-5/87/1621/321/16……..……..……..12-1/2……..7/16
……..……..……..……..……..……..851119/1629/321/16……..……..……..……..13-3/89/16
10……..……..……..……..……..……..52121/411/321/3213……..……..……..……..1/4
……..10101010……..……..5312-3/45/1615/321/32……..1414-1/4……..……..5/16
……..……..……..……..……..10……..5412-3/47/1621/321/16……..……..……..14-5/8……..7/16
……..……..……..……..……..……..105513-1/211/161-3/163/32……..……..……..……..16-3/411/16
12……..……..……..……..……..……..56151/411/321/3216……..……..……..……..1/4
……..12121212……..……..57155/1615/321/32……..16-1/416-1/2……..……..5/16
……..……..……..……..……..12……..58159/1629/321/16……..……..……..17-1/4……..9/16
14……..……..……..……..……..……..5915-5/81/411/321/3216-3/4……..……..……..……..1/4
……..……..……..……..……..……..12601611/161-5/163/32……..……..……..……..19-1/211/16
……..141414……..……..……..6116-1/25/1615/321/32……..18……..……..……..5/16
……..……..……..……..14……..……..6216-1/27/1621/321/16……..……..18-3/8……..……..7/16
……..……..……..……..……..14……..6316-1/25/81-1/163/32……..……..……..19-1/4……..5/8
16……..……..……..……..……..……..6417-7/81/411/321/3219……..……..……..……..1/4
……..161616……..……..……..6518-1/25/1615/321/32……..20……..……..……..5/16
……..……..……..……..16……..……..6618-1/27/1621/321/16……..……..20-5/8……..……..7/16
……..……..……..……..……..16……..6718-1/211/161-3/163/32……..……..……..21-1/2……..11/16
18……..……..……..……..……..……..6820-3/81/411/321/3221-1/2……..……..……..……..1/4
……..181818……..……..……..69215/1615/321/32……..22-5/8……..……..……..5/16
……..……..……..……..18……..……..70211/225/321/16……..……..23-3/8……..……..1/2
……..……..……..……..……..18……..712111/161-3/163/32……..……..……..24-1/8……..11/16
20……..20……..……..……..……..72221/411/331/3223-1/2……..……..……..……..1/4
……..20……..20……..……..……..73233/817/321/16……..25……..……..……..3/8
……..……..……..……..20……..……..74231/225/321/16……..……..25-1/2……..……..1/2
……..……..……..……..……..20……..752311/161-5/163/32……..……..26-1/2……..11/16
24……..……..……..……..……..……..7626-1/21/411/321/3228……..……..……..……..1/4
……..242424……..……..……..7727-1/47/1621/321/16……..29-1/2……..……..……..7/16
……..……..……..……..24……..……..7827-1/45/81-1/163/32……..……..30-3/8……..……..5/8
……..……..……..……..……..24……..7927-1/413/1617/163/32……..……..……..31-1/4……..13/16

Dimensions in inches. Raised face height matches depth of groove.

DIMENSIONAL TOLERANCES B16.5 – 2003

Threaded, Socket-Welding, Slip-On, Lap Joint, and BlindWeld Neck
Outside Diameter (1)when the O.D. is 24″ or less±1/16″Outside Diameter (1)when the O.D. is 24″ or less±1/16″
when the O.D. is over 24″±1/8″when the O.D. is over 24″±1/8″
Inside DiameterThreadedwithin limites on boring gaugeInside Diameter= 10″±1/32″
Socket-Welding, Slip-On and Lap-Joint= 10″+1/32″, -0″ =12″+1/16″,-0″12″ through 18″±1/16″
= 20″+1/8″, -1/16″
Outside Diameter of Hub (1)= 12″+3/32″, -1/16″Diameter of Contact Face1/16″ Raised Face±1/32″
= 14″±1/8″1/4″ Raised Face Tongue & Groove Male, Famale±1/64″
Diameter of Contact Face1/16″ Raised Face±1/32″Diameter of Hub at Base (1)when Hub Base is 24″ or less+1/16″
1/4″ Raised Face Tongue & Groove Male, Famale±1/64″when Hub Base is over 24″±1/8″
Diameter of CounterboreSame as for Inside DiameterDiameter of Hub at Point of WeldingNPS = 5″+3/32″, -1/32″
NPS = 6″+5/32″. -1/32″
DrillingBolt Circle±1/16″DrillingBolt Circle±1/16″
Bolt Hole Spacing±1/32″Bolt Hole Spacing±1/32″
Concentricity of Bolt Circle with Respect to FacingNPS = 2 1/2″, 1/32″ maxConcentricity of Bolt Circle with Respect to FacingNPS = 2 1/2″ 1/32″ max
NPS = 3″, 1/16″ maxNPS = 3″ 1/16″ max
Thickness= 18″+1/8″, -0″Thickness= 18″+1/8″, -0″
= 20″+3/16″,-0″= 20″+3/16″,-0″
Length Through the Hub (1)= 18″+1/8″, -1/32″Length Through the HubNPS = 4″±1/16″
5 = NPS = 10″+1/16″, -1/8
= 20″+3/16″, -1/16″= 12″+1/8″, -3/16

WELDING BEVEL STANDARDS
 

(1) Tolerances not listed in B16.5-2003

RTJ Face Dimensions and Flange Tolerances PDF (for printing)

Reviews

There are no reviews yet.

Be the first to review “RTJ FACE DIMENSIONS AND FLANGE TOLERANCES”

Your email address will not be published. Required fields are marked *