Class 600 Studding Outlets
Studding Outlets Studding Outlets
Shell Mount
Tangential Mount
Studding Outlets
Flat Bottom

 

Class 600 Studding Outlets
Bore OD Thickness OD of RF Stud Circle Hole Dia # of Holes Hole Depth Tap Size T.P.I. Tap Depth Flat Bottom Weight
B O  T R C     U     V Base per 1"
 1/2 3.75 1.50 1.38 2.62 27/64 4 0.88  1/2 13 0.56 3.8 3.1
 3/4 4.62 1.75 1.69 3.25 17/32 4 1.12  5/8 11 0.75 6.7 4.6
1    4.88 1.75 2.00 3.50 17/32 4 1.12  5/8 11 0.75 7.4 5.1
1 1/4 5.25 1.75 2.50 3.88 17/32 4 1.12  5/8 11 0.75 8.6 5.8
1 1/2 6.12 1.94 2.88 4.50 21/32 4 1.31  3/4 10 0.88 13 7.8
2    6.50 1.75 3.62 5.00 17/32 8 1.12  5/8 11 0.75 12 8.5
2 1/2 7.50 2.00 4.12 5.88 21/32 8 1.31  3/4 10 0.88 19 11
3    8.25 2.00 5.00 6.62 21/32 8 1.31  3/4 10 0.88 23 13
3 1/2 9.00 2.12 5.50 7.25 49/64 8 1.44  7/8 9 1.00 28 15
4    10.75 2.12 6.19 8.50 49/64 8 1.44  7/8 9 1.00 41 22
5    13.00 2.25 7.31 10.50   7/8 8 1.56 1    8 1.12 63 32
6    14.00 2.25 8.50 11.50   7/8 12 1.56 1    8 1.12 68 36
8    16.50 2.50 10.62 13.75 1      12 1.81 1 1/8 8 1.25 101 46
10    20.00 2.75 12.75 17.00 1  1/8 16 2.12 1 1/4 8 1.44 160 67
12    22.00 2.75 15.00 19.25 1  1/8 20 2.12 1 1/4 8 1.44 180 76
14    23.75 2.88 16.25 20.75 1  1/4 20 2.25 1 3/8 8 1.56 201 82
16    27.00 3.00 18.50 23.75 1  3/8 20 2.38 1 1/2 8 1.69 271 105
18    29.25 3.25 21.00 25.75 1  1/2 20 2.56 1 5/8 8 1.88 331 118
20    32.00 3.25 23.00 28.50 1  1/2 24 2.56 1 5/8 8 1.88 387 139
24    37.00 3.75 27.25 33.00 1  3/4 24 3.00 1 7/8 8 2.12 571 176
Dimensions are in inches.  Weights are in pounds.
Material: Studding Outlets are most commonly provided in SA-105. They can also be made from a full range of stainless and alloy materials.
Thickness: The standard thickness shown above for all studding outlets is the minimum required per ASME Section VIII Division I Paragraph UG-43(d) for thread engagement and an ID mount. It is important to note that each individual application should be analyzed for proper thickness.
Facing: The Studding Outlet minimum thickness "T" includes proper raised face per ANSI B16.5. Outlets can be supplied with any special facing as needed upon request.
Drilling and Tapping: Studding Outlets are furnished to ANSI B16.5 specifiations unless otherwise specified. Thread depth is in accordance with ASME Section VIII Division I Para. UG-43(g) for a design temperature not to exceed 650ºF, a base metal stress of 17,500 psi(g), and a stud stress of 25,000 psi(g). All other materials exceeding these stresses should be checked for UG-43 compliance.
Bore: Bore sizes shown above are standard. Other sizes can be furnished upon request.
Curving: Connections can be furnished contoured to fit any shell, head, or cone at additional cost. Specify diameter to be mounted.

 

Class 600 Studding Outlets PDF (for printing).