Class 2500 Studding Outlets
Studding Outlets Studding Outlets
Shell Mount
Tangential Mount
Studding Outlets
Flat Bottom

 

Class 2500 Studding Outlets
Bore Size OD Thickness OD of RF Stud Circle Hole Dia # of Holes Hole Depth Tap Size T.P.I. Tap Depth Flat Bottom Weight 
B O  T R C     U     V Base per 1"
 1/2 5.25 2.00 1.38 3.50 21/32 4 1.31  3/4 10 0.88 10 6.1
 3/4 5.50 2.00 1.69 3.75 21/32 4 1.31  3/4 10 0.88 11 6.6
1    6.25 2.12 2.00 4.25 49/64 4 1.44  7/8 9 1.00 15 8.5
1 1/4 7.25 2.25 2.50 5.12  7/8 4 1.56 1    8 1.12 22 11
1 1/2 8.00 2.50 2.88 5.75 1    4 1.81 1 1/8 8 1.25 29 14
2    9.25 2.25 3.62 6.75  7/8 8 1.56 1    8 1.12 34 18
2 1/2 10.50 2.50 4.12 7.75 1    8 1.81 1 1/8 8 1.25 49 23
3    12.00 2.75 5.00 9.00 1 1/8 8 2.12 1 1/4 8 1.44 71 30
4    14.00 3.25 6.19 10.75 1 3/8 8 2.38 1 1/2 8 1.69 112 40
5    16.50 3.75 7.31 12.75 1 5/8 8 2.81 1 3/4 8 2.00 179 55
6    19.00 4.12 8.50 14.50 1 7/8 8 3.31 2    8 2.25 259 72
8    21.75 4.38 10.62 17.25 1 7/8 12 3.31 2    8 2.25 345 91
10    26.50 5.12 12.75 21.25 2 3/8 12 4.00 2 1/2 8 2.81 590 134
12    30.00 5.50 15.00 24.38 2 5/8 12 4.38 2 3/4 8 3.12 799 168
Dimensions are in inches.  Weights are in pounds.
Material: Studding Outlets are most commonly provided in SA-105. They can also be made from a full range of stainless and alloy materials.
Thickness: The standard thickness shown above for all studding outlets is the minimum required per ASME Section VIII Division I Paragraph UG-43(d) for thread engagement and an ID mount. It is important to note that each individual application should be analyzed for proper thickness.
Facing: The Studding Outlet minimum thickness "T" includes proper raised face per ANSI B16.5. Outlets can be supplied with any special facing as needed upon request.
Drilling and Tapping: Studding Outlets are furnished to ANSI B16.5 specifiations unless otherwise specified. Thread depth is in accordance with ASME Section VIII Division I Para. UG-43(g) for a design temperature not to exceed 650ºF, a base metal stress of 17,500 psi(g), and a stud stress of 25,000 psi(g). All other materials exceeding these stresses should be checked for UG-43 compliance.
Bore: Bore sizes shown above are standard. Other sizes can be furnished upon request.
Curving: Connections can be furnished contoured to fit any shell, head, or cone at additional cost. Specify diameter to be mounted.

 

Class 2500 Studding Outlets PDF (for printing).